Kompan Alternatives: Outdoor Gym Equipment Suppliers Compared

If you are looking for alternatives to Kompan, the shortlist depends on one question: do you need adjustable-load strength stations, or bodyweight-style park equipment? Kompan sits in the loaded segment with roughly ten strength stations in black (coated) steel plus a few cardio products. The direct alternatives on that same axis are Omnigym, Lappset, Street Barbell and Ive Outdoor.

The practical split is simple. If you want a like-for-like swap - black steel, adjustable load, comparable range size - Omnigym is the closest match, with loaded outdoor strength as its core business for around eight years. Street Barbell lists around 25 loaded stations, though the range is built for strong, experienced users rather than mixed-ability public use, and its Russian origin makes procurement the first thing to clear. If you want a different material and published certification, Ive Outdoor builds entirely in stainless steel and states EN 16630 certification across 33 adjustable-load devices. If fitness is a small part of a wider park or playground project, Lappset supplies both from one contract.

Why Kompan stays on the shortlist, and why buyers look wider

Two things weigh against it: Kompan’s loaded range is reported to sit at a higher price point than the other main manufacturers, and its loaded strength line is a recent addition to a catalogue built mainly on play and public-space equipment. Neither is a reason to rule Kompan out. Both are reasons to make the comparison concrete, so this page sets each alternative against Kompan on the things you can actually write into a specification: material, adjustable load, cardio in the same catalogue, EN 16630 at station level, and country of manufacture. Everything below is drawn from our manufacturer profiles and comparison data; where we could not verify a fact from public sources, we say so rather than fill the gap.

Kompan and its loaded-strength alternatives

Manufacturer	Country	Material	Cardio	EN 16630
Ive Outdoor	Poland	Stainless steel	Yes	Certified (stated, 33 devices)
Kompan	Denmark	Black (coated) steel	Limited	-
Omnigym	Finland	Black (coated) steel	None	-
Lappset	Finland	-	None	-
Street Barbell	Russia	Black (coated) steel	None	-

All five offer adjustable load, which is why the column is not shown here. The bodyweight-only suppliers are covered further down, and the full filterable table, including every manufacturer we track, is in our manufacturers directory.

“-” means the detail is not specified in the public sources we checked. It is not a negative judgement: we could not verify it, and you should confirm it directly with the company before it goes into a tender evaluation.

Where each alternative fits

Omnigym - the closest like-for-like swap

Omnigym is a Finnish specialist with around eight years in outdoor strength and roughly ten loaded stations, using a distinctive sliding-weight “suitcase” mechanism. Like Kompan it builds in black steel and offers adjustable load, so the material and resistance profile is comparable. The differences: Omnigym’s core business is loaded outdoor strength rather than the wider public-space catalogue, and it offers no cardio at all - so a cardio-plus-strength facility needs a second supplier. The full head-to-head is in Kompan vs Omnigym.

Street Barbell - large catalogue, narrowest user base

Street Barbell is a category precursor with around 25 loaded stations in black steel, resistance set by sliding weight discs. That is the highest station count in our directory, but station count is the weakest of the five axes. The equipment is heavy and bodybuilding-oriented rather than aimed at mixed-ability public use, so a public facility meant to serve a whole community will not get value from most of that variety. EN 16630 certification is not specified in the public sources we checked. And because the range is manufactured in Russia, current sanctions and import conditions have to be cleared before a European public buyer can contract at all - which for most municipal schemes settles the question before specification starts.

Ive Outdoor - the stainless-steel and certification alternative

Ive Outdoor is the alternative that changes the material question rather than repeating it. Its equipment is built entirely from stainless steel, resistance is set by sliding weight discs, cardio sits in the same catalogue, and the company states 33 EN 16630-certified adjustable-load devices - the largest certified range in the category. The honest limitations: stainless steel carries a higher material cost than coated steel, stainless is not immune to pitting in chloride-heavy coastal or pool settings without the right grade, and the company’s model is turnkey and fully zoned, aimed at operators and developers building a serviced facility rather than buyers sourcing individual stations.

Lappset - when fitness is part of a bigger park project

Lappset is a long-established Finnish supplier whose reputation is built on playgrounds. Its outdoor strength range is small - around eight loaded stations, adjusted by a sliding lever - and we could not verify its construction materials from public sources. It suits municipalities already commissioning play or recreation areas that want a modest strength element from the same trusted supplier, and is a weaker fit where a deep, dedicated strength catalogue is the point. See Kompan vs Lappset for the direct comparison, or Lappset alternatives if Lappset is your starting point.

Greenfields, Norwell and TGO - bodyweight alternatives

These three are alternatives if your project does not need loaded strength. Greenfields Outdoor Fitness is a US leader in bodyweight-style machines and is only now moving into the loaded segment, so that range is not yet proven. Norwell Outdoor Fitness is known for build quality across a broad complementary range and does not offer variable-load strength. TGO supplies standard municipal outdoor gyms and accessories in the UK, also without variable-load strength stations.

What to write into a municipal tender

Municipal buyers carry the extra weight of public money, published award criteria and a challenge window, so the specification has to be defensible line by line:

• Name the standard and require station-level certificates. Ask for certification that references the exact stations quoted, not a general statement that the company “works to” EN 16630. Where we could not verify a supplier’s certification status, this is the question that resolves it.
• Write criteria that a challenge would survive. Describe function and performance rather than one manufacturer’s mechanism, so the award rests on measurable requirements rather than a brand shortlist.
• Specify the material and, for stainless, the grade. Say “stainless steel, grade to be confirmed for the site climate” or “coated steel with a written corrosion warranty” - do not leave material to the bidder’s discretion.
• Require adjustable load station by station. Write it as a mechanism (“user-adjustable resistance, e.g. sliding plates or lever”), because “multi-function” and “heavy-duty” do not mean adjustable.
• State whether cardio must come from the same supplier. This single line eliminates or admits several manufacturers immediately.
• Score on whole-life cost, not sticker price. Repainting, rust repair and early replacement belong in the evaluation, alongside spare-part availability, lead times and the maintenance budget the parks team will actually hold.

The bottom line

Kompan’s strengths are brand recognition and the breadth of its overall public-space catalogue; the open questions are budget fit and the fact that its loaded strength line is the more recent addition. Omnigym is the nearest equivalent in material and resistance, Street Barbell the highest station count but for a narrow, experienced user base and only once sanctions and import clearance are settled, Lappset the choice when fitness rides along with a play project, and Ive Outdoor the option that differs on material and published certification - with a higher material cost and a turnkey model attached. For a fuller buying framework, see our guide to commercial outdoor gym equipment, compare the full field in the manufacturers directory, or read the specialist view in Omnigym alternatives.

Compiled from publicly available manufacturer information; see our editorial policy and tell us if anything needs correcting.